MILWAUKEE C12D 12V SCREWDRIVER WITH C12PC PIPE CUTTER TOOL 2 X 1.5ah RED LITHIUM BATTERIES + 3Rd BATTERY & KIT BAG

MILWAUKEE C12D 12V SCREWDRIVER WITH C12PC PIPE CUTTER TOOL 2 X 1.5ah RED LITHIUM BATTERIES + 3Rd BATTERY & KIT BAG

Red Lithium-ion Batteries

Milwaukee's revolutionary new Red Lithium-Ion chemistry within the cell has less electrical resistance than other chemistries, allowing significantly improved transfer of power. This means less voltage drop during application - so faster speeds and higher torque under load. This chemistry in turn delivers improved performance of up to 40% more run time, 20% more speed and torque, and fade free power. It also can operate down to 0°F/-18°C, runs 20% cooler at all times, can take up to 50% more recharges and has no memory effect.


MILWAUKEE C12D COMPACT 12V SCREWDRIVER WITH 2 X 1.5ah RED LITHIUM BATTERIES


Features:

This Compact lightweight tool weighs only 960 grams including the battery with a speed of 500 rpm and a maximum torque of 19 Nm, it can screw in up to 120 screws measuring 5 x 60 mm with each battery charge. Developed according to the special demands of professional users for compact and powerful machines. In addition to a longer battery service life and a longer battery running time, users were especially interested in ergonomic aspects such as a light weight, a compact design and ease of handling.

The ¼" Hex of the Milwaukee C12 D permits one-handed changing of drill or screwing bits with an E6.3 hexagonal profile. A built-in LED also enables the user to work precisely in dark or unlit places. When inn use the battery display permanently shows the remaining battery charge. Thanks to a variable motor drive, the craftsman has full control over the utilized screwing force. The stable motor casing made of metal protects the motor against damage. The Milwaukee C12 D is sold with two 12 Volt batteries, a charger and a tool bag.

• METAL GEARCASE - Full-metal gear housing - Robust contruction, long service life
• LED light for perfect illumination of the working area
• Forward/Lock/Reverse switch well-positioned for easy operation
• Variable speed control
• One handed 1/4 " Hex bit reception
• Battery Fuel Gauge
• 14-stage torque adjustment with an additional drilling stage
• Ergonomic and extremely lightweight tool only 900 gr. for less physical strain and fatigue
• Slimline Softgrip handle
  

Specifications:

• No-load speed 0-500 rpm
• Static stalling torque 15 Nm
• Torque: soft joint / hard joint 10 /19 Nm
• Wood screws 6 mm
• Drilling capacity in steel / wood 10/ 16 mm
• Weight with battery 0.9 kg

MILWAUKEE C12PC 12V PIPE CUTTER BARE UNIT


Features:

Milwaukee Electric Tool Corporation introduces the industry's first M12 Copper Tubing Cutter, specifically designed for cutting copper with the speed and versatility that plumbers, mechanical contractors and remodelers require. With a 12V LITHIUM-ION Battery and ultra efficient gearing, the C12PC performs up to 200 cuts on a single charge. A close quarter rotating head cuts installed copper tubing with as little as 1-½" of clearance. At 500 RPM, the patent pending cutting mechanism cuts copper tubing up to 10X faster than conventional cutters and automatically adjusts diameter to cut through 3/8" - 1".

The inline design offers greater reach and reduced wrist strain in confined spaces. The metal cutting head is corrosion and rust resistant, sealed for protection from water. Electronic overload protection and uni-body construction provide exceptional durability. Additional features include a Battery Fuel Gauge which displays the remaining run-time, and a Built-in LED Light, which illuminates the line of cut. High performance 500 rpm motor cuts 12 mm copper pipe in less than 3 seconds. Auto locking cut mechanism cuts installed copper tubing with as little as 37mm clearance. Auto adjusting jaws - automatically adjust to pipe size. All metals sealed front end - rust and corrosion resistant cut heat.
Slim line SOFTGRIP handle and built in LED light illuminates the work area. Fuel gauge displays remaining battery charge state


Specification:

• 500RPM Motor cuts 13mm pipe in less than 3 seconds
• Cuts 12,15,18,22,25 & 28mm Tube
• Auto-lock with min cut of 37mm clearance
• Auto Adjusting Jaws
• Slim easy grip handle
• Up to 200 cuts from a single charge
  
  
  

Supplied with : Bare unit in cardboard box