TREND CR/QR/SET/2 60 PIECE CRAFT PRO QUICK RELEASE SET
Ref: CR/QR/SET/2
new
Next day delivery available on this item
Heavy duty fabric tool holder with a selection of assorted Craft Pro tools from Trend. Set supplied in tool holder with elasticated pockets.
More
£59.99 inc. VAT
(£49.99 exc. VAT)
-
Unfortunately this item is currently out of stock.
-
-
TREND CR/QR/SET/2 60 PIECE CRAFT PRO QUICK RELEASE SET
- Magnetic Quick Chuck which is fitted into a standard 3/8-inch key or keyless chuck and allows any direct drive 1/4-inch hex bits to then 'snap' in effortlessly.
- Flat bits 16mm, 19mm, 22mm, 25mm and 30mm diameter.
- Auger bits 10mm and 13mm diameter.
- Hex drill bits 1mm, 2mm 3mm, 4mm, 5mm, 6mm and 7mm diameter.
- Drill bit guides 2mm and 2.75mm for hinges.
- Drill countersinks with 2.5mm, 3.25mm and 3.5mm drill bits.
- Twenty-three 25mm insert bits Pozi, Phillips, slotted, Torx and hex.
- Three Pozi 50mm screwdriver bits.
- Magnetic bit holder with retractable barrel.
- Magnetic nut drivers for 6mm, 8mm, 10mm and 12mm A/F bolts.
- Square drive adapters 1/4-inch, 3/8-inch and 1/2-inch A/F.
- Tungsten Carbide Tipped masonry drills 5mm, 6mm, 7mm and 8mm diameter.
- Deburr countersink and hole enlarger tools.
- Set supplied in tool holder with elasticated pockets to hold quick change shank and belt strap and are hook and loop fastening.
Internal code: AB110566
TREND CR/QR/SET/2 60 PIECE CRAFT PRO QUICK RELEASE SET
- Size: 300 mm x 165 mm
- Tools up to 155 mm: 20
- Tools up to 80 mm: 15
- Screwdriver insert bits: 23
- Quick chucks: 2
- Belt strap: 2
TREND CR/QR/SET/2 60 PIECE CRAFT PRO QUICK RELEASE SET
- 1 x 60mm Quick change magnetic holder
- 1 x Magnetic 80mm Screw guide bit holder
- 4 x Masonry bits 5, 6, 7 & 8mm
- 1 x Drill bit guide No.6 (2.4mm)
- 1 x Drill bit guide No.8 (2.8mm)
- 7 x Hex shank drills 1, 2, 3,4, 5, 6 &7mm
- 9 x Flat bits 10, 13, 16, 19, 22, 25, 30, 32 & 35mm
- 3 x Drill countersinks 2.4, 3.2 & 3.6mm
- 1 x Rose countersink
- 2 x Nut drivers 10 & 13mm
- 3 x Pozi 50mm power bits PZ1, 2 & 3
- 3 x PH 50mm power bits PH1, 2 & 3
- 1 x 150mm PZ2 bit
- 23 insert bits: 5 x slot, 3 x PZ, 3 x PH, 6 x Torx and 6 x Hex
- 1 x 3mm Hex key